Filter
Top Products
BEFORE EVERY
EACH 8
USE HOURS
MAINTENANCE
SCHEDULE
Check Brake Operation
Check Tire Pressure
T Check Operator Presence & ROS Systems
A Check for Loose Fasteners
C Check/Replace Mower Blades
| Lubrication Chart
0 Check Battery Level
a Clean Battery and Terminals
Clean Debris Off Steering Plate
Check Mower Levelness
Check V-Belts
m
Check Engine Oil Level _ if
Chanqe Engine Oil (with oil filter)
Change Engine Oil (without oil filter)
NE Clean Air Filter
G Clean Air Screen
Inspect Muffler/Spark Arrester
N Replace Oil Filter !If equipped)
E Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
-- Re lace Fuel Filter ____
EVERY EVERY EVERY EVERY BEFORE
25 50 100 SEASON STORAGE
HOURS HOURS HOURS
l/ v"
v' v'
_/ v'
v'2
v'
!,1
qt,_,2
v'2
Bm_m
I Ohangemofeoftel_whenoperatingunderahesvyloadofinhighambier_ttemperatures 3 RepFaoebladesmoreoftenwhenmowJngil_sandysoi_ 5 SeeCleaningir_Mainter_anceSection
2 ServicemofeoftenwheaoperatingindirtyordustyoondJtior_s 4 Notrequiredifequippedwithmainten_ncef[eebattef¥
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made pe-
riodically to properly maintain your tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter ensure
proper air-fuel mixture and help your en-
gine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
LUBRICATION eHAp_Tpin dle
(_ Spindle / ........ _.1 Zerk
Zerk FrontWheel
Bearingzerk
(_) @ Engine
Bearingzerk
@ Steerinc
Sector Gear
Teeth
_General Purpose Grease
@Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life ofthe self-lubricating
bearings. Ifyou feet they must be lubricated,
use only a dry, powdered graphite type lu-
bricant sparingly.
16