Filter
Top Products
MAINTENANCE SCHEDULE ._ ,_._ ,_£._ ,_._ _o_ o.._ ,F_
As COMPLETE 'ERV'OEREGULAR SERVICE DATES
Chh:: kkTB_aek;[eOsPe:_:ion _
Check Operator Presence and
T ROSSystems
R Check for Loose Fasteners _ gl_5
Sharpen/Replace Mower Blades _3
T Lubrication Chart
0 Check Battery Level _4
R Clean Battery and Terminals I1_
Check Transaxle Cooling
Check V_Befts
Check Engine Oil Level _
Change Engine Oit (with oil filter) _,2
E Change Engine Oil (without oil filter) _,2
N CleanAirFilter _:
G Clean Air Screen
Inspect Muffler/Spark Attester
E Replace Oil Filter (If equipped) _2
Clean Engine Cooling Fins _2
Replace Spark Plug _2
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 =Change more often when operating under a heavy load or
in high ambient temperatures.
2 =Service more often when operating in daty or dusty conditions.
3 - Replace blades more oflen when mowing in sandy soil
4 = Not required if equipped with maintenance4ree battery.
5 - T_ghten front axle pivot bole to 35 ft.qbs, maximum.
Do not overlighton.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
(!) SI: pindle
Zerk Zerk
(_ Front Wheel
Bearing zerk
Front Wheel
Bearing zerk
(_ Steerin
Sector Gear
Teeth
(!) Mandrel
Zerks
(_General Purpose Grease
@Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly.
16