Filter
Top Products
CLEANING
• Clean engine, battery, seat, finish, etc.
of all foreign matter.
• Keep finished surfaces and wheels free
of all gasoline, oil, etc.
• Protect painted surfaces with automo-
tive type wax.
We do not recommend using a garden
hoseto clean your tractor unless the
electdcal system, muffler, airfilter and
carburetor are covered to keep water out.
Water in engine can result in a shortened
engine life.
,_CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
1. Depress brake pedal fully and set parking brake.
2. Place attachment clutch in "DISENGAGED" position•
3. Turn ignitionkey =OFF" and remove key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect spark plug wire from spark plug and place wire where itcannot
come in contact with plug.
TRACTOR
TO REMOVE MOWER
1. Place attachment clutch in "DISEN-
GAGED" position.
2. If equipped, tum height adjustment
knob to lowest setting.
3. Lower mower to its lowest position.
4. Disengage belt tension rod from lock
bracket.
_CAUTION: Rod is spdng loaded. Have
a tight gdp on rod and release slowly.
5. Remove retainer spdng holding anti-
swaybar to chassis bracket and
disengage anti-swaybar from bracket.
6. Remove four retainer springsfrom
front plate assembly and remove
plate•
Suspension
BeltTension Arms
Rod
(Disengaged_,;,
Position) _
Chassis
7. Remove retainer spdngs from
suspension arms at deck and disen-
gage arms from deck.
8. Raise attachment liftto its highest
position.
9. Slide mower forward and remove belt
from electric clutchpulley.
10. Slide mower out from under rightside
of tractor.
TO INSTALL MOWER
Follow procedure described in "INSTALL
MOWER AND DRIVE BELT"in the
Assembly sectionof this manual.
Electric
Clutch Pulley
Front Mower
Bracket
Front
Plate
Bracket
Retainer
Anti-Sway
Bar
_r Springs
Springs
(Both Sides)
Mower
Bracket
22