Filter
Top Products
CUSTOMER RESPONSIBILITIES
AS YOU COMPLETE
Check Brake Operation _
Check Tim Pm_um
T Interlock Systems 14r
R CheckforLooseFasteners _ _7
_ SharpeNReplace Mower Blades _4
T Lubrication Chart
0 CheckBatteryLevel I_
W claan Battery and Temlinals _ I_
Check Ttinsaxla Cooling I1_
Adjust Blade BeR(s) Tension I_s
AdJust Moron Drive Balt(s) Tension I_s
Check Engine Oil Level V t
i Change Eng ne Oil I_1.=,: If
E Clean Air Filter
a Clean Air Screen
GI Inspect Muffler/Spark Arrester
Replace Oil Filter (if equipped) I_l.t
N ' Clean Engine C°°ling Fins _=
Replace Spark Plug
Replace Air Filter Paper Cartridge 1_2
Replace Fuel Filter V p
1 - C_ mole o#_'_ where o_l_ltJnO tmd4w i hew4y k_d or In _gh am_4e_t temp_oturN. 5 * _ equipped with adjultibl/systmn.
2 - Sen4ce m_. ohln when opera,rig in erty ofdusty_.
3 - NK_oped w_ o¢ f_er. change oJevwp/50 hours.
4 - Repkx_ _=de= mor_ oftenwhen rnowb_ in sandy sol.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual. Some
adjustments will need to be made periodi-
cally to properly maintain your tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or re_laL'_eair filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation,
• Check tire pressure.
• Check operator presence and interlock
systems for proper operation.
• Check for loose fasteners.
6 - Netrequired# equipped withmalntenance-_e b_t_y.
7 -"nghtenItont ex_ pivotbo, to 35 tL-Ibs, maximum.
DOr_ ov_ighter_
LUBRICATION CHART
Zerk Zerk
Front
FrontWheel Wheel
Beadng_ _:_ ring
Qutch Y l | I II
Pivot(s) "_,_,_____
SAE 30 or 10w30 Motor OIL
O General Purpose Grease .
Refer to Maintenance Engine Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bear-ings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings. If you feel they must be lubricated,
use only a dry, powdered graphite type lubri-
cant sparingly.
18