Filter
Top Products
MAINTENANCE SCHEDULE _'_ _/_'=_/_'_s/'_'_ __D
AsYouCO_PL_rE f_..._'_ _._ _.
Check ]]re Pressure
Check OperatorPresence and
T Interlock Systems I_
R CheckforLooseFastenem I_ 1_7 I_
A Sharpen/ReplaceMower Blades !4
T Lub_.,a.onChart I/
0 Check Batten/Level
R Clean Battery and Tenninels
Check Tratmaxle Cooling J_
Adjust Blade Belt(s) Tension _s
Adjust Motion Drive Belt(s) Tension ll_s
Check EngineOil Level
Change EngineOil
E ae=, Air Fitter
N CleanAirScreen
Inspect MutttedSpark Arrester
Replace Oil Filter (If equipped)
N Clean EngineCoolingRns
Replace Spa_ Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more ofleq when oper allng unde_• him W _ld or inhigh ambient temperi¢ure=. 5 -If equipped with •djultabie rtttem,
2 - Sin"Acemoreopenwhen0pen=ringindkl"/ordustycondit;on=, iS-Notr_ulr_ ifequippedwithm•inte_incl4me battery.
3 * If equipped wllh oil filter, _ oil ivep/50 houri. 7 -Tighten front IJde pl_ boit to 35 It,4b=, maximum.
4 - R_olac• biades mo_e alten when mow_g In landy :og, Do not oveftlgNen.
V' v'
t/,
v',
t/
v',
GENERAL RECOMMENDATIONS LUBRICATION CHART
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and interlock
systems for proper operation.
• Check for loose fasteners.
(_) - Spindle(_)
Zerk =_ Zerk
I
• ) Front _)
Wheel
Beadng -_ Bearing
Zerk Zerk
_) Engine
I_ i I
I I I
I I I I
L__.' '._.J
(D SAE 30 or 10w30 motor oil
(I) General Purpose Grease
_) Refer to Maintenance =ENGINE _
Section
Gearshift
Pivots
IMPORTANT: Do not oil or grease the pivo
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricat-
ing bearings. If you feel they must be
lubricated, use only a dry, powdered
graphite type lubricant sparingly.
17