Filter
Top Products
ACCELERATION TEST
• Move throttle control lever from slow to
fast position. If engine hesitates or dies,
turn idle mixture valve out (counter-
clockwise) 1/8 turn. Repeat test and
continue to adjust, if necessary, until en-
gine accelerates smoothly.
High speed stop is factory adjusted. Do
not adjust - damage may result.
IMPORTANT: Never tamper with the en-
gine governor, which is factory set for
proper engine speed. Overspeeding the
engine above the factory high speed set-
ting can be dangerous• If you think the en-
gine-governed high speed needs adjust-
ing, contact your nearest authorized ser-
vice center/department, which has proper
equipment and experience to make any
necessary adjustments.
idle Speed Throttle
Screw Lever
Valve With
Limiter
28