Craftsman 917.25736 Lawn Mower User Manual


 
MAINTENANCE
u ,,,, _ ,u
.........
MAINTENANCE SCHEDULE o S,6_ o_ _o_ _o #_ # _o
0AT
REGULAR SERVICE ES
J
Check Brake Operation
Check Tire Pressure
T
R Check for Loose Fasteners
A Sharpen/Replace Mower Blades
C Lubricate Pivot Points
T Check Battery Level/Recharge
Clean and Terminals
Battery
Check Pump Assembly Fluid Level
Check Transmission Cooling
Check Engine Oil Level
Change Engine Oil
E Clean Air Filter
N Clean Air Screen
G inspect Muffler/Spar k Ai.'.iester
N Clean Engine Cooling Fins
E Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fue( Filter
J
/,I
1 - Change more often when operating under a heavy load or tn htgh ambient temperatures
2 - Service more often when operating in dlrly or dusty conditions
3 * Replace blades more often when mowing in sandy soil
GENERAL RECOMMENDATIONS
The warranty on this vehicle does not cove_ items that have
been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
unit as instructed in this manual,
Some ad ustments will need to be made periodically to
proper y ma ntain your un t.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season
Once a year you should replace the spark plug, clean
or replace air filter, and check blades and belts for
wear A new spark plug and clean air filter assure
proper air-fuel mixture and help your engine run better
and last longer.
BEFORE EACH USE
Check engine oil level.
Check brake operation
Check tile pressure
Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRICATION CHART")
14
LUBRICATION CHART
** FRONT WHEEL BEARING
_'_ ENGINE _ _
* PUMP --_
*'* FRONT WHEEL BEARING
/
T
ATTACHMENT
_ CLUTCHPIVOT
* SAE lOW30 MOTOR OIL API - SR/CC
** GENERAL PURPOSE GREASE
REFER TO ENGINE MAINTENANCE SECTION
IMPORTANT - Do not oil or grease the pivot points which have
special nylon beatings Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating bearings. Ifyou feel
they must be lubricated, use only a dry, powdered graphite type
lubricant sparingly