Filter
Top Products
The completed blower tube should look like Figure 6.
Elbow Tube ./ Hose Clamp
Flex Tube
Hose Clamp_ _
)o0
Upper Blower Tube-.._._____
First Lower _
Blower Tube _
Second Lower
Blower Tube _
Nozzle
Fig. 6
Throttle Cables
On/Off Switch
_Throttle Grip
WARNING: To avoid serious personal injury, make
sure that the blower tubes are locked in place or firmly
installed.
Secure the Throttle Cables
Place a zip tie around the elbow tube and the throttle cables (Fig.
7) as shown, making sure not to crimp the cables.
Zip Tie
i
Fig. 7
Zip Tie
Adjusting the Handle
1. Rotate the throttle grip counterclockwise around the blower
tube until it is pointing directly downward (Fig. 8, A).
I _ I WARNING: Do not rotate the handle clockwise to
adjust. This may cause the throttle cables to
disconnect from the throttle grip or the engine.
A
_ B
Fig. 8
2. Pull or push the throttle grip along the handle tube until its
distance from the backpack blower is comfortable (Fig. 8, B).
3. Align the throttle grip with the slot closest to the comfortable
place and rotate the throttle grip clockwise into the upright
position (Fig. 9).
I Fig. 9