Craftsman 770-5875B Chipper User Manual


 
Lower the leaf ramp by holding the handle and pulling
up on the release bar See figure 12 Leaves and small
twigs can be raked into the chipper-shredder with the
leaf ramp in this position See figure 13
Handle
Leaf Ramp
No larger than
1t2 inch diameter
FIGURE 14.
Elastic
>Lock
Nuts
\
FIGURE 12.
Bulky material, such as stalks or heavy
branches (anything over tt2" diameter),
should be fed into the chip-it guide.. See
figure 15. Do not force or jam material in-
to the chip-it guide Make certain leaf
ramp is raised as shown in figure 15 when
using the chip-it guide
Make certain chip-it guide door is closed
when not in use
FIGURE 13o
Leaf Ramp ,_(
Small branches can also be fed into the leaf ramp See
figure 14
Keep Leaf Ramp Raised
When Using Chip-It Guide
FIGURE 15,