Filter
Top Products
No
Self-Tapping
Screws (C)
Lower Leaf
Ramp Section
INSTALLATION OF HOPPER AND UPPER GUItDE
EXTENSION
1. The lower leaf ramp section on the chipper-shred-
der is placed in an upright position for shipping
purposes Lower this section,
2, Place the hopper in position on the shredder
-- m See figure 3. Start all four hex washer head self-
tapping screws/C),'then tighten securely using a
1/2" socket wrench
FIGURE 3.
Lowe r
Leaf
Ramp
Section
Keeper(D)
3 Assembte the keepers (D) to the sides of the unit
•-------- with two hex washer head self-tapping screws (C),
using a t/2" socket wrench, T_ghten securely
\ _ Self-Tapping
Screw (C)
FIGURE 4.
Lower Leaf __
Ramp Section _ \
Ramp Section
FIGURE 5.
4 Place upper leaf ramp section inside the lower fear
ramp section Secure with four hex bolts (A) and
hex lock nuts (B). Tighten securely See figure 5