Craftsman 580.76201 Pressure Washer User Manual


 
KNOW YOUR HIGH PRESSURE WASHER
Read this owner's manual and safety rules before operating your high pressure washer. Compare the
illustrationswith your high pressure washer to familiarize yourselfwith the locationsof various controlsand
adjustments. Save this manual for future reference.
Spray Gun
High Pressure
Outlet
Chemical Injection
Tube and Filter
Air Cleaner
High Pressure Hose
Choke Rod
Gas CaP
Adjustable
Igni_on .
Switch Lever
Inlet
(wand)
-Pump
Oil Pill Cap
Adjustable Nozzle
Starter Grip
Ignition Switch Lever -- Sets engine in starting mode
for recoil starter and STOPS running engine.
Choke Rod -- Adjusts for cold or warm enginestartup.
Recoil Starter Grip -- For startingengine manually.
Air Cleaner -- Dry type filter element limitsthe amount
of dirt and dust that gets into the engine.
Spray Gun -- Controls the applicationof water onto
cleaning surface with trigger device. Includessafety latch.
Chemical Injection Tube and Filter -- Mixeswater and
detergent in outlet water flow.
High Pressure Outlet -- Connection for high pressure
hose.
Water Inlet -- Connection for garden hose.
Adjustable Pressure Regulator -- Adjusts water
pressure,
Pump -- Develops high water pressure.
Turbo Nozzle -- Attaches to nozzle extension. Creates a
high pressure stream that rotates in a circular pattern.
Adjustable Nozzle -- Attaches to nozzle extension and
adjusts to low or high pressure. Twisting nozzle adjusts
the narrow spray pattern to a fan spray pattern.
Note: You can only siphon detergent in the low pressure
mode.
Nozzle Extension (wand) -- Attach one end to the
spray gun. Attach the other end to either the adjustable
nozzle or turbo nozzle.
High Pressure Hose -- Attach one end to the pump.
Attach the other end to the spray gun.
Oil Fill Cap -- Fill engine with SAE 10W-30 oil here.
Gas Cap -- Fillgas tank with unleaded gasoline here.