Filter
Top Products
KNOW YOUR PRESSURE WASHER
Read the owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Spray Gun
Model Data Decal
Nozzle Extension
High Pressure Hose
Recoil Starter
Fuel Cap
Adjustable Nozzle
Choke Knob
/
/
/
/
/
Oil Fill Cap and Dipstick
Water Inlet
J
Throttle Control Lever
High Pressure Outlet
Air Filter
\
\
\
Pump
Adjustable Nozzle - Always attached to nozzle
extension. Pull back for high pressure or push forward
for low pressure; turn clockwise for narrow spray or
turn counterclockwise for fan spray.
Air Filter = Dry type filter element limits the amount of
dirt and dust that gets in the engine.
Choke Knob = Used to help start a cold engine.
Detergent Pick-Up Tube and Filter = Use to draw
detergent from chemical bottle to the low pressure
water stream.
Fuel Cap = Fill engine with regular unleaded fuel here.
High Pressure Hose = Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet = Connection for high pressure
hose.
Detergent Pick=Up
Tube and Filter
Model Data Decal - Provides model and serial number
of pressure washer. Please have these readily available
when calling for assistance.
Nozzle Extension =Attach to spray gun to use
adjustable nozzle.
Oil Fill Cap and Dipstick = Check and fill engine with
oil here. See page 6 for oil recommendations and
filling instructions.
Pump = Develops high pressure water.
Recoit Starter = Used for starting the engine
manually.
Spray Gun = Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
Throttle Control Lever = Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet = Connection for garden hose.