Filter
Top Products
HOW TO REMOVE THE AUGER
1. Remove the belt cover. See "How
To Remove The Belt Cover" in the
maintenance section.
2. Remove the auger drive belt. See
"How To Remove The Auger Drive
Belt" in the Service And Adjustment
section.
3. Remove the auger pulley from the
auger shaft (threads are left hand;
turn clockwise to remove).
4. To keep the auger from rotating, set
a 2"x4" piece of wood on the cen-
ter paddle to secure auger.
5. Remove bolts A, washer F, and nuts
B from front of right cover (See
Figure 23).
6. Remove screw C from back of right
cover.
7. Remove bolts D and nuts E.
AF
Right Cover
C
/
8. Slide the auger out of the right side
of the auger housing (See
Figure 22).
9. Slide the auger out of the bearing
on the left side of the auger hous-
ing.
10. To install the auger, reverse the
above steps.
Washer
Auger Figure 22
A
B
B
B
Auger
Housing
Auger
Auger Pulley
Figure 23
_001072M 21