Craftsman 536.8852 Snow Blower User Manual


 
CUSTOMER RESPONSIBILITIES
SERVICE RECORDS
Fill in dates as you Before Every Every Every
complete regular Each 5 10 2S Each Before SERVICE
service. Use Often Hours Hours Hours Season Storage DATES
Check Engine Oil Level -_ _
Change Engine Oil _j _/
_ghten All Screws and _J
Nuts
Check Spark Plug -,j _j
Lubricate Chute Control _/
Flange
Drain Fuel _]
Check Fuel
Check Auger Ddve
Cable Adjustment
(See Cable Adjustment) _j
GENERAL RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual.
Some adjustments will need to be
made periodically to properly maintain
your snow thrower.
All adjustments in the Service and Ad-
justments section of this manual
should be checked at least once each
season.
AFTER EACH USE
Check for any loose or damaged
parts.
Tighten anyloose fasteners.
Check and maintain the auger.
Check controls to make sure they
are functioning properly.
If any parts are worn or damaged,
replace immediately.
Run the machine to clear the auger
of snow.
To prevent freezing of the auger or
controls, remove all snow and s)ush
from the snow thrower.
LUBRICATION CHART
Lubricate chute control
flange. Lubricate flange
with a clinging type
grease such as
Lubdplate.
Figure 8
F-OO1072M 15