Filter
Top Products
OPERATION
KNOW YOUR EDGER
READ THE OWNER'S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the
Edger. To familiarize yourself with the location of the controls, compare the illustrations with
your Edger. Save this manual for future reference.
Engine Stop Lever
Recoil
Starter
Handle
Depth Control Lever
Control Rod
Throttle Control
Fuel Tank
Cap
Blade Guard
Air Filter
Blade Oil Fill Cap
Blade Guide
Figure 7
Throttle Control - Controls the engine
speed.
Primer Button - Injects fuel directly into
the carburetor for faster starts.
Recoil Starter Handle - The engine is
equipped with an easy pull recoil starter.
Depth Control Lever - Use to control the
depth of cut.
Blade Guard - Use to prevent stones or
other material from being thrown at the oper-
ator.
Engine Stop Lever- Must be engaged
to allow the engine to start and run. Re-
lease to stop the engine.
EYE PROTECTION
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
F-OO1101M
10
WARNING: Debris thrown from
the Edger can result in foreign
objects being thrown into the
eyes, which can cause severe eye dam-
age. Always wear safety glasses or eye
shields when operating the Edger.