Craftsman 486.252444 Tiller User Manual


  Open as PDF
of 20
 
11
TO REPLACE V-BELT
FIG. 12
FIG. 11
WARNING: Shutoff(disengage)theTine
ClutchLever,theTillerEngineandtheTractor
Enginebeforemakinganyrepairs.
ReplaceV-beltifithasbeendamagedconsiderablyfrom
slippingunderheavyloadsorifitshowcracksorfrayed
edges.Refertogures11and12.
IMPORTANT:Donotmoveorremovethebeltguide.
Ifthepositionofthebeltguideisaccidentallyaltered,
returnittothecorrectsetting(6-1/2"abovethetineshield
supportplate).
• Removethescrewfromthetopofthebeltguard.
• Removethehexnutfromtherearoftheguard.
• Removethebeltguardtoallowaccesstodrivebelt.
• Disengagetineclutchleverandremovebelt.
• Reverseaboveproceduresforinstallationofnewbelt.
SERVICE AND ADJUSTMENTS
 previous next