Filter
Top Products
iNSTALL HANGER BRACKETS AND SHOULDER
BOLTSTO OUTSIDE OF FRAME
STEP 5: (SEE FIGURE 5)
, Remove the bolt, if present, in the hole directly behind
the brake rod on the left side of the tractor frame.
* Attach the L.H. Hanger Bracket (tube facing out) to the
hole using a 5/16" × 3/4" self threading bolt.
* Install a round head shoulder bolt into the hole that is
9-1/2" to the rear of the bolt you just installed. Secure
it with a 3/8" flange nut on the inside of the frame.
BRAKE ROD
5/16" x 3/4" SELF
THREADING BOLT
FIGURE 5
L.H. HANGER
BRACKET
, \
\\ \ \
\
\ 3/8" FLANGED
\
\_ NUT
LEFT SIDE ViEW
STEP 6: (SEE FIGURE 6)
o Remove the bracket, if present, from the hole directly
behind the end of the brake rod on the right side of
the tractor frame. Store the bracket and bolt.
Attach the R.H. Hanger Bracket to the hole using a
5/16" x 3/4" self threading bolt.
Install a round head shoulder bolt into the hole that is
9-1/2" to the rear of the bolt you just installed. Secure
it with a 3/8" flange nut on the inside of the frame.
SHOULDER
BOLT
5/16"x3/4"SELF
THREADING BOLT
R.H. HANGER
BRACKET
RIGHTENDOF
BRAKEROD
FIGURE 6
3/8" FLANGED
NUT
RIGHT SiDE ViEW