5
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
REF PART NO. QTY. DESCRIPTION
A 48894 2 Self Threading Screw, 3/8-16 x 1-1/2"
B 43062 2 Hex Bolt, 3/8-16 x 1-1/2"
C 43001 2 Hex Bolt, 3/8-16 x 1"
D 48866 2 Pivot Spacer
E 1643-60 2 Plastic Grip
F 43003 4 Lock Washer, 3/8"
G 43070 4 Washer, 3/8"
H 44742 4 Plug
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
STEP 1: (SEE FIGURE 2)
Open parts bags labelled "A" and "B" and verify that all
parts are present.
CAUTION! Mufer is hot! Allow engine to
cool down before proceeding with bumper
installation.
NOTE: Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS
STEP 2: (SEE FIGURE 3)
• Remove tractor hood. (Refer to tractor manual.) Place
hood on cardboard or on a mat to protect paint.
• If you have an (LT) Lawn Tractor with a heat shield
like the one shown, remove the heat shield.
IMPORTANT: Be sure to re-attach the heat shield after
bumper is installed.
FIGURE 3
SHOWN FULL SIZE
PARTS BAG "B" EXCEPT WHERE NOTED
A
C
G
D
B
H
E
F
(parts bag "A")
(parts bag "A")
(parts bag "A")
(parts bag "A")
FIGURE 2
MUFFLER HEAT SHIELD
(LT) LAWN TRACTOR