Filter
Top Products
STEP 5: (SEE FIGURE 6)
Spread ends of bumper enough to fit slots onto bolts
in rear mounting holes in tractor frame.
The bumper has three mounting holes. The rear
hole provides the most clearance while the forward
holes provide a neater appearance. Use a hole
that provides enough clearance for hood to stay in
raised position when opened. Insert a carriage bolt
and washer through tractor frame and into desired
mounting hole on each side of bumper and secure
with a whizlock nut.
iMPORTANT: Before fully tightening nuts, be sure
tractor hood will stay in raised position when opened.
HEX BOLT
\ FIGURE 6
STEP 6: (SEE FIGURE 7)
Replace the browning shield using the front screws
you removed in Step 2.
REPLACE _'_
FRONT SCREWS
__._BEPLACE
BROWNING SHIELD i FIGURE 7
4 Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE