Filter
Top Products
8
STEP 14 - ASSEMBLE HOPPER CLAMPS
•
Assemble two hopper mount clamps (Q) over the hole
in the middle of each upper hopper tube using two
carriage bolts ( E) and two nylock nuts (F). Tighten
only fi nger tight. See fi gure 14.
•
Fold the bag fl aps around the lower hopper tubes and
attach to the bag bottom using the snaps. See fi gure
13.
FIGURE 13
STEP 13 - ATTACH BAG BOTTOM
•
Insert the bag frame strap into the stitched sleeve at
the front edge of the bag bottom. See fi gure 11.
FIGURE 12
FIGURE 14
CLEVIS PIN (O)
HAIR COTTER
PIN (M)
BAG FRAME STRAP
SNAP
FLAP
BAG FRAME STRAP
STITCHED
SLEEVE
•
Assemble the bag frame strap to the holes in the
lower hopper tubes using two clevis pins (O) and hair
cotter pins (M). See fi gure 12.
FIGURE 11
5/16" x 3/4"
CARRIAGE
BOLT (E)
5/16" NYLOCK
NUT (F)
HOPPER
MOUNT
CLAMP (Q)
UPPER
HOPPER
TUBE