Filter
Top Products
7
• Turn the rear hopper tube so that the brace holes in
the middle of the tube
face up
. Assemble the ends
of the rear hopper tube onto the ends of the lower
hopper side tubes. Fasten together using plastic plugs.
See fi gure 12.
FIGURE 12
• Slide the two upper hopper tubes together and line up
the center holes as shown in fi gure 10.
FIGURE 10
• Fasten the upper hopper tubes together by inserting a
plastic plug into the center holes. See fi gure 11.
FIGURE 11
LOWER
HOPPER
SIDE TUBE
PLASTIC PLUG
REAR HOPPER TUBE
(brace holes on top)
UPPER HOPPER TUBES
FIGURE 13
• Place the assembled lower hopper tubes into the
bottom of the hopper bag as shown in fi gure 13.
•
Attach the ends of the lower hopper tubes to the
inside
of the upper hopper tubes using two 3/8" x
1/2" clevis pins inserted from the inside, and two
3/32" hair cotter pins. See fi gure 13.
LOWER HOPPER TUBE
HOPPER BAG
BOTTOM
UPPER
HOPPER
TUBE
3/8" x 1/2"
CLEVIS PIN
3/32" HAIR
COTTER PIN
1/4" x 1-1/8"
CLEVIS PIN
3/32" HAIR
COTTER PIN
3/32" HAIR
COTTER PIN
BAG FRAME STRAP
FIGURE 14
• Insert the bag frame strap into the stitched sleeve
along the front edge of the bag bottom. See fi gure 14.
•
Assemble the bag frame strap to the holes in the
lower hopper tubes using two 1/4" x 1-1/8" clevis pins
and 3/32" hair cotter pins. See fi gure 14.
PLASTIC PLUG