Craftsman 486.24029 Lawn Sweeper User Manual


  Open as PDF
of 16
 
STEP 9: (SEE FIGURE 9)
• Slidethefrontapsofthehopperbagupontothe
front of the lower hopper tubes. Secure the bag frame
tube to the lower hopper tubes using two clevis pins
(28) and small hairpin cotters (19).
NOTE:Besurefrontapsofhopperbagarepositioned
above clevis pins.
• Snap the sides of the bag to the bottom of the bag at
the front corners .
FIGURE 10
STEP 11: (SEE FIGURE 11)
• Slidetheassembledtubesdownthroughtheapsin
the sides of the hopper bag (3) as shown.
STEP 12: (SEE FIGURE 12)
• Slide the assembled tubes back up underneath the
wind screen as shown.
26
26
24
24
6
6
28
19
FIGURE 9
FIGURE 11
FIGURE 12
STEP 10: (SEE FIGURE 10)
• Place two washers (42) between the middle holes in
a rear hopper tube (11). Install two cotter pins (27)
into the holes, spreading the ends around the tube.
• Assemble the rear hopper tube (11) to the two upper
hopper tubes (6) using two 1/4" x 1" curved head
bolts (26) and 1/4" nylock nuts (24). The bolt heads
shouldfaceupasshowningure10.
11
27
42
7
 previous next