Filter
Top Products
FIGURE 5
20
19
STEP 5: (SEE FIGURE 5)
• Lock the drawbar into position by inserting a 3/8" x
3" pin (20) into the center hole and securing it with a
small 3/32" hairpin cotter (19).
FIGURE 6
STEP 6: (SEE FIGURE 6)
• Attach the hitch bracket (12) and straight hitch
bracket (13) to the drawbar using two 5/16" x 2-1/2"
hex bolts (15) and 5/16" nylock nuts (21).
• Assemble the hitch pin (35) and two spacers (22)
to the hitch brackets. Secure them in place with the
large 3/32" hairpin cotter (18).
21
13
12
15
35
22
18
STEP 7: (SEE FIGURE 7)
• Slidethebagframetube(1)throughthefrontapin
the bottom of the bag.
• Slidethetwolowerhoppertubes(10)intotheapsat
the front of the hopper bag (3) as shown.
FIGURE 8
STEP 8: (SEE FIGURE 8)
• Install a rear hopper tube (11) onto the ends of the
lower hopper tubes (10) making sure the holes in the
rear hopper tube are facing up.
• Secure the rear hopper tube (11) to the lower hopper
tubes (10) with two 1/4" x 1" curved head bolts (26)
and 1/4" nylock nuts (24).
NOTE: Hopper bag (3) not shown for clarity.
24
24
11
10
10
26
26
FIGURE 7
3
10
1
Hole must face up
6