Filter
Top Products
1.Loopextensioncordthroughcord
retainer.
2.Insertcordreceptaclethroughloop.
3.Holdthecordreceptacleinone
hand.Usetheotherhandtogently
pullontheextensioncordtore-
moveslack.
NOTE:Onlyremoveenoughslack
fromtheextensioncordtosecureit
tothecordretainer.Pullingtoohard
coulddamagetheextensioncord.
4.Insertthecordreceptacleintothe
recessedplug.
KNOWYOURELECTRIC BLOWER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
ON/OFF _=-_ Top Handle
Switch :_---"_.----Air_f--'-'JJ Vents
C°_dine_r--_r inlet
ON/OFF SWITCH
The ON/OFF SWITCH is used to
activate the motor.
Blower Tube
Nozzle
BLOWER TUBE AND NOZZLE
The BLOWER TUBE and NOZZLE are
designed to direct the flow of air.
STOPPING YOUR UNIT
To stop the unit, move the ON/OFF
switch to the OFF (0) position.
STARTING YOUR UNIT
Move the ON/OFF switch to the ON (1)
position to turn on the unit.
WlTCH POSITIONS
1 = ON
0 = OFF
,zt
4tSWARNING: Do not use the unit
without the blower tubes properly at-
tached to avoid flying debris and/or im-
peller contact which can cause serious
injury. Always wear eye protection to
prevent rocks or debris from being
blown or ricocheting into the eyes and
face which can result in blindness or
serious injury.
OPERATING POSITION
Protection
BLOWER
A
,t_,WARNING: Inspect the area be-
fore using the unit. Remove all debris
and hard objects such as rocks, glass,
wire, etc., that can ricochet, be thrown,
or otherwise cause injury or damage
during operation.
Use your unit as a blower for:
• Sweeping debris or grass clippings
from driveways, sidewalks, patios, etc.
• Blowing grass clippings, straw, or
leaves into piles, or removing debris
from corners, around joints, or be-
tween bricks.
6