Craftsman 358.79731 Blower User Manual


 
WARNING: Perform the following
steps after each use:
•AlIow engine to cool, and secure the
unit before storing or transporting.
Store unit and fuel in a welt venti-
lated area where fuel vapors cannot
reach sparks or open flames from
water heaters, electric motors or
switches, furnaces, etc.
Store unit with all guards in place.
Position unit so that any sharp object
cannot accidentally cause injury.
Store unit and fuel welt out of the
reach of children.
Prepare unit for storage at end of sea-
son or if it will not be used for 30 days
or more.
EXTERNAL SURFACES
If your unit is to be stored for a period
of time, clean it thoroughly before
storage. Store in a ctean dry area.
Lightly oil external metaI surfaces.
FUEL SYSTEM
Under FUELING ENGINE in the OPERA-
TION section of this manual, see mes-
sage Iabeted IMPORTANT regarding
the use of gasohot in your engine.
Fuel stabilizer is an acceptable alterna-
tive in minimizing the formation of fuel
gum deposits during storage. Add stabi-
lizer to gasoline in fuel tank or fuel stor-
age container. Fotlow the mix instruc-
tions found on stabilizer container. Run
engine at least 5 minutes after adding
stabilizer.
Craftsman 40:1,2-cycle engine oil (air
cooIed) is already bIended with fuel
stabilizer. If you do not use this Sears
oil, you can add a fuel stabilizer to your
fuel tank.
INTERNAL ENGINE
Remove spark pIug and pour 1 tea-
spoon of 40:1, 2-cycte engine oil (air
cooled) through the spark plug open-
ing. Slowly pull the starter rope 8 to
10 times to distribute oil.
Replace spark plug with new one of
recommended type and heat range.
Clean air filter.
Check entire unit for loose screws,
nuts, and bolts. Replace any dam-
aged, broken, or worn parts.
At the beginning of the next season,
use only fresh fuel having the proper
gasoline to oil ratio.
OTHER
Do not store gasoline from one sea-
son to another.
Replace your gasoline can if it starts
to rust.
-11 -