Craftsman 358.7958 Trimmer User Manual


 
Neverstartenginewithclutch
shroudremoved.Theclutchcanfly
offandcauseseriousinjury.
Besurebladeortrimmerheadstops
turningwhenengineidles.
Makecarburetoradjustmentswith
thelowerendsupportedtoprevent
bladeortrimmerlinefromcontacting
anyobject.Holdunitbyhand;donot
usetheshoulderstrapforsupport.
Keepothersawaywhenmakingcar-
buretoradustments.
UseonlyrecommendedCraftsman'!:'
accessoriesandreplacementparts.
Haveallmaintenanceandservicenot
explainedinthismanualperformedby
yourSearsServiceCenter.
FUEL SAFETY
Mix and pour fuel outdoors.
Keep away from sparks or flames.
Use a container approved for fuel.
Do not smoke or allow smoking near
fuel or the unit or while using the unit.
Avoid spilling fuel or oil. Wipe up all
fuel spills before starting engine.
Move at least 10 feet (3 meters)
away from fueling site before start-
ing engine.
Stop engine and allow it to cool be-
fore removing fuel cap.
Empty the fuel tank before storing or
transporting the unit. Use up fuel left
in the carburetor by starting the en-
gine and letting it run until it stops.
Store unit and fuel in area where fuel
vapors cannot reach sparks or open
flames from water heaters, electric
motors or switches, furnaces, etc.
Always store gasoline in a container
approved for flammable liquids.
CUTTING SAFETY
WARNING: Inspect the area to
be cut before each use. Remove ob-
jects (rocks, broken glass, nails, wire,
string, etc.) which can be thrown or
become entangled in the blade or
trimmer head.
Keep others including children, ani-
mals, bystanders, and helpers at least
50 feet (15 meters) away. Stop engine
immediately if you are approached.
Always keep engine on the right-
hand side of your body.
Hold the unit firmly with both hands.
Keep firm footing and balance. Do
not overreach.
Keep blade or trimmer head below
waist level. Do not raise engine
above your waist.
Keep all parts of your body away
from blade, trimmer head, and muf-
fler when engine is running. A hot
muffler car cause serious burns.
Cut from your left to your right.
Cutting on right side of the shield will
throw debris away from the operator.
Use only in daylight or good artificial
light.
Use only for jobs explained in this
manual.
TRANSPORTING AND STORAGE
Stop tile unit before carrying.
Keep muffler away from your body.
Allow the engine to cool and secure
the unit before storing or transport-
ing it in a vehicle.
Empty the fuel tank before storing or
transporting the unit. Use up fuel left
in the carburetor by starting the en-
gine and letting it run until it stops.
Store unit so the blade or line limiter
blade cannot accidentally cause in-
jury. The unit can be hung by the
shaft.
Store unit out of reach of children.
This unit is not equipped with an anti-
vibration system and is intended for
occasional use only.
SAFETY NOTICE: Exposure to vibra-
tions through prolonged use of gasoline
powered hand tools could cause blood
vessel or nerve damage in the fingers,
hands, and joints of people prone to cir-
culation disorders or abnormal swell-
ings. Prolonged use in cold weather
has been linked to blood vessel dam-
age in otherwise healthy people. If
symptoms occur such as numbness,
pain, loss of strength, change in skin
color or texture, or loss of feeling in the
fingers, hands, or joints, discontinue the
use of this tool and seek medical atten-
tion. An anti-vibration system does not
guarantee the avoidance of these prob-
lems. Users who operate power tools
on a continual and regular basis must
monitor closely their physical condition
and the condition of this tool.
SPECIAL NOTICE: This unit is
equipped with a temperature limiting
muffler and spark arresting screen
which meets the requirements of Cali-
fornia Codes 4442 and 4443. All U.S.
forest land and the states of California,
Idaho, Maine, Minnesota, New Jersey,
Oregon, and Washington require by law
that many internal combustion engines
be equipped with a spark arresting
screen. If you operate in a locale where
such regulations exist, you are legally