Craftsman 358.791031 Trimmer User Manual


 
_WARNING:Performthefollow-
ingstepsaftereachuse:
Allowenginetocoolbeforestoring
ortransporting.
Storeunitandfuelinawellventi-
latedareawherefuelvaporscannot
reachsparksoropenflamesfrom
waterheaters,electricmotorsor
switches,furnaces,etc.
Storeunitwithallguardsinplace.
Positionunitsothatanysharpob-
jectcannotaccidentallycauseinjury.
Storeunitandfuelwelloutofthe
reachofchildren.
SEASONALSTORAGE
Prepareunitforstorageatendofsea-
sonorifitwillnotbeusedfor30days
ormore.
Ifyourunitistobestoredforaperiod
oftime:
Cleantheentireunitbeforelengthy
storage.
Storeinacleandryarea.
Lightlyoilexternalmetalsurfaces.
FUEL SYSTEM
Empty the fuel system before storage
for 30 days or longer. Drain the gas
tank, start the engine and let it run un-
til the fuel lines and carburetor are
empty. Use fresh fuel next season.
Under FUELING ENGINE in the OPERA-
TION section of this manual, see mes-
sage labeled IMPORTANT regarding
the use of gasohol in your engine=
Fuel stabilizer is an acceptable alter-
native in minimizing the formation of
fuel gum deposits during storage. Add
stabilizer to the gasoline in the fuel
tank or fuel storage container. Follow
the mix instructions found on stabilizer
container. Run engine at least 3 min-
utes after adding stabilizer.
Craftsman 40:1,2-cycle engine oil (air
cooled) is already blended with fuel
stabilizer. If you do not use this Sears
oil, you can add a fuel stabilizer to
your fuel tank.
ENGINE
Remove spark plug and pour 1 tea-
spoon of 40:1,2-cycle engine oil (air
cooled) through the spark plug
opening. Slowly pull the starter rope
8 to 10 times to distribute oil.
Replace spark plug with new one of
recommended type and heat range.
Clean air filter.
Check entire unit for loose screws,
nuts, and bolts. Replace any dam-
aged, broken, or worn parts.
At the beginning of the next season,
use only fresh fuel having the proper
gasoline to oil ratio.
OTHER
Do not store gasoline from one sea-
son to another.
Replace your gasoline can if it starts
to rust.
18