Filter
Top Products
• Thelinewilleasilyremovegrass
andweedsfromaroundwalls,
fences,treesandflowerbeds,butit
alsocancutthetenderbarkoftrees
orshrubsandscarfences.Tohelp
avoiddamageespeciallytodelicate
vegetationortreeswithtenderbark,
shortenlineto4-5inches(10-13
cm)anduseatlessthanfullthrottle.
• Fortrimmingorscalping,useless
thanfullthrottletoincreaselinelife
anddecreaseheadwear,especially:
• Duringlightdutycutting.
• Nearobjectsaroundwhichtheline
canwrapsuchassmallposts,
treesorfencewire.
• Formowingorsweeping,usefull
throttleforagoodcleanjob.
TRIMMING- Holdthebottomofthe
trimmerheadabout3inches(8cm)
abovethegroundandatanangle.Al-
lowonlythetipofthelinetomake
contact.Donotforcetrimmerlineinto
workarea.
Trimming
3 inches (8 cm
above ground
SCALPING - The scalping technique
removes unwanted vegetation down
to the ground. Hold the bottom of the
trimmer head about 3 inches (8 cm)
above the ground and at an angle. Al-
low the tip of the line to strike the
ground around trees, posts, monu-
ments, etc. This technique increases
line wear.
Scalping
MOWING - Your trimmer is ideal for
mowing in places conventional lawn
mowers cannot reach. In the mowing
position, keep the line parallel to the
ground. Avoid pressing the head into
the ground as this can scalp the
ground and damage the tool.
Mowing
SWEEPING - The fanning action of
the rotating line can be used for a
quick and easy clean up. Keep the
line parallel to and above the surfaces
being swept and move the tool from
side to side.
Sweeping