Craftsman 358.74535 Trimmer User Manual


 
J
EDGING
MOWING
Your trimmer is ideal for mowing in
places conventional lawn mowers
cannot reach. In the mowing position,
keep the line parallel to the ground.
Avoid pressing the head into the
ground as this can scalp the ground
While edging allow the tip of the line to and damage the tool.
make contact. Do not force the line. Mowing //////
The edge guard helps protect the unit _,. , ....
and keeps the unit from contacting the _ _<..
ground. Take extra caution while edg- __
ing as objects can be thrown from the _2,:_/->-'_'-, _ t '_
trimmer line. _/_L_._i
"_'%X_,__ _' _'-*"_b-':_. SWEEPING'"_[ - ":_"
_'Xx__, The fanning action ofthe rotating line
Edging _XX_t_!//,_..._,_ii can be used for a quick and easy
clean up. Keep the line parallel to and
above the surfaces being swept and
-c_._ move the tool from side to side.
_,.,_ _,,, Sweeping
._.t"_
SCALPING _.
The scalping technique removes un-
wanted vegetation. Hold the bottom of
the trimmer head about 3 inches (8 cm)
above the ground and at an angle. Al-
low the tip of the line to strike the
ground around trees, posts, monu-
ments, etc. This technique increases
line wear.
Scalping 1 //_"}
CUSTOMER RESPONSIBILITIES
_, WARNING: Disconnect power source before performing maintenance.
CARE & MAINTENANCE TASK
Check for loose fasteners and parts
Check for damaged or worn parts
Inspect and clean unit and labels
WHEN TO PERFORM
Before each use
Before each use
After each use