Filter
Top Products
NOTE:Ifshieldisnotproperlyinstalled,
damagetounit(includingmotorfailure)
willresult.
1=Aligntheinstallationarrowonthe
shieldwiththeinstallationarrowon
themotorhousing(seeillustration
below).
2=Inserttheshieldontothemotor
housing.Ensurethecuttinghead
remainsfreetorotateandtheline
isnotcaughtbetweentheshield
andthemotorhousing.
3. Twisttheshieldasillustrateduntil
itsnapssecurelyintoplace.Make
suretheshieldisassembledtothe
unitasshownintheillustrationbe-
lowandintheKNOWYOURUNIT
sectionofthismanual.
ALIGNINSTALLATION ARROWS
Twist shield
in direction of
arrow to
assemble
CAUTION: Sharp line Iimiter blade
KNOW YOUR TRIMMER
READTHiSOPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT
Compare the illustrations with your unit to familiarize yourself with the location of the vari-
ous controls and adjustments. Save this manual for future reference.
ar Switch
Cord
Retainer
Recessed
Plug
Locking
Sleeve
Assembly Air
Vents
Debris Shield
RECESSED PLUG
The RECESSED PLUG is where you at-
tach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn on
the unit. Squeeze the trigger switch to
operate the unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cut-
ting line to the proper cutting length.
Motor Housing
-nmmer Head
with 0,065 in,
Trimmer Line
Tap Button
Line Limiter Blade
ASSIST HANDLE
The ASSIST HANDLE is used to help hold
and guide the unit.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line
and rotates during operation.
TAP BUTTON
The TAP BUTTON is used to advance the
cutting line during operation and to re-
move the spool during line replace-
ment.
6