Filter
Top Products
Aftereachuse,ensureON/STOP
switchisintheSTOPposition,then
cleanallsawdustfromtheguidebar
andsprockethole.
Tomaintainguidebar:
• MoveON/STOPswitchtoSTOR
• Loosenandremovebarnutsand
clutchcover.Removebarandchain
fromsaw.
• Cleantheoilholesandbargroove
aftereach5hoursofoperation.
• Burringofguidebarrailsisanormat
processofrailwear.Removethese
burrswithafiatfile.
• Whenrailtopisuneven,useaflat
filetorestoresquareedgesand
sides.
rT_ File RailEdges _ _]__
and Sides
Square
Worn Groove Correct Groove
Replace guide bar when the groove is
worn, the guide bar is bent or cracked,
or when excess heating or burring of the
rails occurs, tf replacement is necessary.
use only the guide bar specified for your
saw in the repair parts list or on the de-
cal located on the chain saw.
CHECK FUEL MIXTURE LEVEL
• See FUELING ENGINE under the OP-
ERATION section.
LUBRICATION
CHECK CHAIN BRAKE
See CHAIN BRAKE in the OPERATION
section.
CLEAN AIR FILTER
CAUTION: Do not clean filter in gaso-
line or other flammable solvent to
avoid creating a fire hazard or produc-
ing harmful evaporative emissions.
Cleaning the air filter:
A dirty air filter decreases the life and
performance of the engine and in-
creases fuel consumption and harmful
emissions. Always clean your air filter
after 10 tanks of fuel or 5 hours of op-
eration, whichever comes first. Clean
more frequently in dusty conditions. A
used air filter can never be completely
cleaned, tt is advisable to replace your
air filter with a new one after every 50
hours of operation, or annually, which-
ever comes first.
1. Loosen 3 screws on cylinder cover.
2. Remove cylinder cover.
3. Remove air filter cover and air filter.
4. Clean the air filter using hot soapy
water. Rinse with clean cool water.
Air dry completely before reinstal-
ling.
5. ReinstaII air fitter and air fitter cov-
er.
6. Reinstall cytinder cover and 3
screws. Tighten securely.
CyIinder
Air Filter Cover
Cover
• See GUIDE BAR AND CHAIN OIL un-
der the OPERATION section.
INSPECT AND CLEAN UNIT AND
DECALS
• After each use, inspect compIete unit
for loose or damaged parts. Clean the
unit and decals using a damp cloth
with a mild detergent.
• Wipe off unit with a clean dry cloth.
INSPECT MUFFLER AND SPARK
ARRESTING SCREEN
_WARNING: The muffler on this
product contains chemicats known to
the State of California to cause cancer.
As the unit is used, carbon deposits
build up on the muffler and spark ar-
resting screen, and must be removed
to avoid creating a fire hazard or af-
fecting engine performance.
16