Filter
Top Products
13
12
DESCRIPTION DESCRIPTION cont.
KNOW YOUR ELECTRIC HEDGE TRIMMER (Fig. 2)
Your hedge trimmer has many built-in convenience features for fast, efficient cutting.
These features include the front handle with a top trigger switch, and a trigger safety
switch under the rear handle, to prevent accidental starts. Both must be pressed on
to turn the hedge trimmer on.
Your hedge trimmer has a precision built electric motor and it should only be connected
to a 120-volt, 60 Hz AC ONLY power supply (normal household current). The trimmer
should always be used with a GFCI (Ground Fault Circuit Interrupter) outlet.
DO NOT operate this trimmer on direct current (DC). The large voltage drop would
cause a loss of power and the motor would overheat. If the trimmer does not operate
when plugged into correct 120-volt, 60 Hz AC ONLY outlet, check the power supply.
The trimmer comes with a 12-in. pigtail power cord and must be plugged into a proper
extension cord.
This Electric Hedge Trimmer Has the Following Features:
1. 3.2 Amp Motor provides the power to cut branches up to 3/4-inch in diameter.
2. 3000 SPM-Strokes per minute (no-load speed) for fast cutting on a variety of hedge
trimming jobs around the yard.
3. 22-inch long Steel Cutting Bar provides durability and extended cutting reach.
4. Dual Cutting Action helps minimize vibration to reduce operator fatigue and provides
a fast cutting action
5. Hardened Steel Blades stay sharp longer.
6. Dual Safety On/Off Trigger Switches with extended wrap, located on rear handle
and front “T” handle. Both switches have to be depressed to power hedge trimmer ON
7. Ergonomically designed Front “T” Handle for maximum handling control
8. Rear Handle for easy control in all angles of use.
9. Cord Retention Clip located on pigtail cord keeps extension cord connected.
10. Lightweight Ergonomically Designed for easy use and handling comfort
DANGER:
Laceration Hazard. Keep hands away from blades. Handle
blades with care. Keep both hands on handles when power is on.
!
Blade Length
Speed (Strokes per Minute)
Cutting Capacity
Cutting Action
Power Requirement
22-inches
3000
3/4-inch
Dual
120-volt, 60 Hertz AC
SPECIFICATIONS
Fig. 2
Front Trigger
Safety Power Switch
Front Auxiliary
Handle
Rear Handle
Rear Trigger
Safety Power Switch
Cord Retainer Clip
Plug Blades
Pigtail Cord
Blade Guard
22-in.
Blade Support
Cutting Bar
Upper Cutting Blade
Lower Blade
Air Vents