Filter
Top Products
Input...........................................................120 V AC 60Hz.
Cutting Path.................................................................12 in.
Feed type..........................................0.065 in. bump & feed
Replacement Spool Part Number..........................71-85967
Replacement Cutting line Part Number.................71-85822
CORD RETAINER
A convenient cord retainer helps keep the extension cord
connection secure during string trimmer operation.
EDGER GUIDE
The easily mounted edger guide allows the string trimmer
to perform as an edger.
FRONT HANDLE
The string trimmer is equipped with a front handle assembly
for ease of operation and to prevent loss of control.
GRASS DEFLECTOR
ROTATING REAR HANDLE
The rotating rear handle on the string trimmer can be locked
in two different positions for ease of use when edging.
TELESCOPING BOOM
The string trimmer can be adjusted to different extension
points for ease of use.
The trimmer includes a grass deflecter that helps protect
from flying debris.
When working outdoors with a product, use an extension
designated with “WA” on the cord’s jacket.
Before using any extension cord, inspect it for loose or
exposed wires and cut or worn insulation.
**Ampere rating (on product data plate)
0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0
Cord Length Wire Size (A.W.G.)
25´ 16 16 16 16 14 14
50´ 16 16 16 14 14 12
100´ 16 16 14 12 10 —
**Used on 12 gauge - 20 amp circuit.
NOTE: AWG = American Wire Gauge
WARNING:
WARNING:
Keep the extension cord clear of the working area.
Position the cord so that it will not get caught on lumber,
tools, or other obstructions while you are working with
a power tool. Failure to do so can result in serious per
sonal injury.
Check extension cords before each use. If damaged
replace immediately. Never use
cord since touching the damaged area could cause elec
trical shock resulting in serious injury.
ELECTRICAL