Coleman 8fa3 Insect Control Equipment User Manual


 
4
Assembly
Insert Axle through one
Wheel and then insert
Axle through Axle
Bushings.(Make sure
side of tire with
recessed area on hub
is to the outside.)
Insert Axle through
second wheel & cap
both ends with Retainer
Nuts.
To properly seat
Retainer Nuts, gently
tap with a hammer &
support the bottom
of Axle.
Step 3Step 1
Remove all components from the package.
See package label for listing of contents for the model you purchased.
Step 2
With a lightweight hammer, tap Axle Bushings into Base. Make sure
Bushings are fully seated.
TOOLS REQUIRED & OTHER ITEMS: (not provided)
Standard Phillips head screwdriver
7/16" end wrench
Lightweight hammer
Mosquito
Deleto
TM
Inhibitor
Refill
(Linalool)
Stakes
Adhesive
Trap
Mosquito
Deleto
TM
Octenol
Lure
Refill
Axle
Bushing
Base
Axle Bushings will receive the
Axle for the Wheels.
Set both feet on base.
Install front bar in feet.
Step 4
Assemble feet to
base using hard-
ware illustrated.
20# propane cylinder
One (1) AAA battery
(Actual size)