Page 15SKU 98452 For technical questions, please call 1-800-444-3353.
Before the rst use, remove the Fuel Tank Cap (33B3. 1) and ll the Fuel Tank (30B1)
with unleaded gasoline. Then, replace the Fuel Tank Cap. If necessary, rell the
Fuel Tank with unleaded gasoline. (See Figure C.)
To Start The Engine:
Make sure the electrical powered tools/equipment that will be used is not plugged 1.
in to the Generator.
Turn the 115 volt AC Circuit Breaker (5) to its “2. ON” position. (See Figure D.)
Open the Fuel Valve (40B). 3. (See Figure E.)
Move the Choke Lever (116C) to the CLOSED position to start a cold engine. 4.
Leave the Choke Lever (116C) in the open position to restart a warm engine.
(See Figure E.)
REV 09a