Filter
Top Products
SKU 94866 For technical questions, please call 1-800-444-3353 PAGE 12
move the unit slowly and evenly. (See Figure G.)
To Operate The Vacuum:
1. Make sure to remove the Protection Cover (7). Also, make sure the Vacuum
Bag (11) is properly connected to the unit and its Shoulder Strap is properly
adjusted. (See Figure F.
2. Plug the Power Cord/Plug (13) into the nearest 120 volt, grounded, electrical
outlet. (See Figure F.)
3. Hold the unit firmly by the Upper Handle (1) and Lower Handle (2).
(See Figure F.)
4. Turn the Power Switch (4) to its “ON” position. (See Figure F.)
5. Move the Vacuum slowly and evenly
over
the raked grass or leaves. Do not
push the Vacuum Pipe End Piece (9)
into
the material being vacuumed
(See Figure H.)
6. When necessary, turn off the unit, unplug it from its electrical outlet. Then, open
the zipper on the Vacuum Bag (11) and empty its contents into an appropriate
waste container. (See Figure H.)
FIGURE G
FIGURE H
7. When finished using the
Blower/Vacuum, make
sure to turn its Power
Switch (4) to the “OFF”
position.
8. Unplug the unit from its
electrical outlet.
9. Empty the Vacuum Bag
(11).
10. Then store the unit in a
dry, clean, safe location
out of reach of children
and other unauthorized
people.
5. NOTE: The air pressure blown out through the Blower Pipe End Piece (6) can
be changed by adjusting the opening on the End Piece. The larger the opening,
the lower the air pressure coming out of the End Piece. (See Figure G.)