Filter
Top Products
Page 6SKU 94678
For technical questions, please call 1-800-444-3353.
When servicing a equipment, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
Do not alter or adjust any part of the equipment or its engine that is sealed
by the manufacturer or distributor. Only a qualified service technician may
adjust parts that may increase or decrease governed engine speed.
SPECIFIC SAFETY RULES
Maintain labels and nameplates on the generator. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
WARNING! People with pacemakers should consult their physician(s) before
using this product. Electromagnetic fields in close proximity to a heart pacemaker
could cause interference to or failure of the pacemaker.
Avoid body contact with fuels, oils, and lubricants used in the Generator. If
swallowed, seek medical treatment immediately. Do not induce vomiting if fuel is
swallowed. For skin contact, immediately wash with soap and water. For eye con-
tact, immediately flush eyes with clean water.
Prolonged exposure to noise levels above 85 dBA is hazardous to hearing.
Always wear ANSI-approved hearing protection when operating or working around
the Generator when it is running.
Lifting/transport precautions. Never lift the Generator using the engine or al-
ternator lifting lugs. Connect lifting equipment only to the Frame of the Generator.
Before lifting the Generator, ensure the lift rigging and supporting structure are in
good condition, and are rated to lift such a load. Keep all personnel away from the
suspended generator while relocating.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks and cement or other masonry products.
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well-ventilated area,
and work with approved safety equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
(California Health & Safety Code § 25249.5, et seq.)
2.
3.
1.
2.
3.
4.
5.
6.
•
•
•
REV 07l