Filter
Top Products
SKU 92455 For technical questions, please call 1-800-444-3353. Page 13
3. Before the first use, remove the Fuel Tank Cap (33) and fill the Fuel Tank (30B)
with unleaded gasoline. Then, replace the Fuel Tank Cap. Thereafter, check the
Engine’s Fuel Gauge (34) for the amount of unleaded gasoline in the Fuel Tank.
If necessary, refill the Fuel Tank with unleaded gasoline. (See Figure C.)
To Start The Engine:
1. Make sure the electrical powered tools/equipment that will be used is not
plugged in to the Generator.
2. Turn the 115 volt AC Circuit Breaker (5) to its “ON” position. (See Figure D.)
3. Turn on the Fuel Valve (40B). (See Figure E.)
4. Close the Choke Lever (21A) to about 1/8” clearance. (See Figure E.)
OFF
ON
CIRCUIT BREAKER
(5)
FIGURE D
OFF
ON
CLOSED OPEN
FUEL VALVE
CHOKE LEVER
(21A)
FIGURE E
REV 03/06