Filter
Top Products
SKU 91761 For technical questions, please call 1-800-444-3353. Page 4
5. Choose your location: The location site should be a flat, even surface (three
possible set-up options:
1.)
The Trellis can be free standing but
caution
should be taken:
Always distribute weight evenly on the bench to
prevent toppling.
2.)
Stand the Trellis upright and place in 6” deep holes.
Test that the Trellis is level. Pack dirt around Posts (6).
3.)
Place cement in the
holes before positioning the Posts (6). Test that the Trellis is level.
If you are
not experienced in setting up this type of product, it is recommended that you
seek the assistance of a qualified handyman for placement of your Trellis.
6. Place the assembled sides of the Trellis flat on the ground nearest to the
location. With an assistant, insert the “ladder assembly” into the Posts (6).
See Figure C.
7. There must be metal bars inserted in the two Braces (8) to support the weight
placed on the Bench (8).
See Figure D.
Snap the Bench (8) over the Support
Bar (7).
See Figure F–G.
8. Tap the Gothic Caps (1) on the end of each Post (6).
See Figure C.
Figure D
Figure F
Figure E
Metal
Bars
Clamps
Bench (8)
Support
Bar (7)
Figure C
Gothic Cap (1)
Ladder
Assembly
Post (6)