Filter
Top Products
Page 16 For technical questions, please call 1-800-444-3353. SKU 68316
Maintenance and Servicing
Procedures not specically explained in this manual must be performed only by a qualied technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet
before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general condition
of the tool. Check for loose screws, misalignment
or binding of moving parts, cracked or broken
parts, damaged electrical wiring, and any other
condition that may affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
3. For blade changing instructions see “Tool Set Up
– Blade Installation” on page 10.
4. For lubrication instructions see
“Using Lubrication Unit” on page 12.
5. WARNING! If the supply cord of this
power tool is damaged, it must be replaced
only by a qualied service technician.
SAFETY OPERATION MAINTENANCESETUP