Filter
Top Products
Page 10 For technical questions, please call 1-800-444-3353. SKU 68316
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tool Set Up – Blade Installation
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical
outlet before adjusting tool or installing accessories.
TO PREVENT SERIOUS INJURY FROM FLYING FRAGMENTS:
Do not use abrasive blades or masonry-cutting blades. The guards of this saw
are not designed to protect against the failure of such blades.
1. Press the Spindle Lock Pin on the outside of the
housing. Turn blade slowly until pin locks back
into place.
2. Unscrew the Lock Nut, turning it counterclockwise.
B
3. Open the Lower Blade Guard and
lift and remove Blade B.
B
A
4. Lift up and remove Blade A.
A
SAFETY OPERATION MAINTENANCESETUP