Filter
Top Products
Before You Begin
-2- Legend™ 412Z User Manual Rev. 1
Product At A
Glance
Use on Dimmer
x
Auto Programs
x
Outdoor Use
x
Auto-Ranging Power
Supply
P
Sound-Activated
x
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes
Read all the following Safety Notes before working with this product. These notes include
important information about the installation, usage, and maintenance of this product.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET® certified technicians. Do
not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
· Avoid direct eye exposure to the light source while the product is on.
· Always disconnect this product from its power source before servicing.
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
· Do not touch this product’s housing during operation because it may be very hot.
Mounting And
Rigging
· This product is for indoor use only! To prevent risk of fire or shock, do not expose this
product to rain or moisture.
· Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
· Make sure there are no flammable materials close to this product while it is operating.
· Do not carry this product from the head. Always use the base.
· When hanging this product, always secure to a fastening device using a safety cable.
Power And
Wiring
· Always make sure you are connecting this product to the proper voltage in accordance
with the specifications in this manual or on the product’s specification label.
· Never connect this product to a dimmer pack or rheostat.
· Never disconnect this product by pulling or tugging on the power cable.
Operation
· Do not operate this product if you see damage on the housing, lenses, or cables. Have
the damaged parts replaced by an authorized technician at once.
· Do not cover the ventilation slots when operating to avoid internal overheating.
· The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at a
higher temperature.
· In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in clusters,
LEDs exhibit higher operating temperatures than in ideal, single-LED conditions. For this
reason, using clustered LEDs at their fullest intensity significantly reduces the LEDs’ lifespan.
Under normal conditions, this lifespan can be 40,000 to 50,000 hours. If extending this
lifespan is vital, lower the operating temperature by improving the ventilation around the
product and reducing the ambient temperature to an optimal operating range. In addition,
limiting the overall projection intensity may also help to extend the LEDs’ lifespan.