Filter
Top Products
MegaStrobe™ FX12 QRG EN
4
Mounting
Before mounting this product, read the Safety Notes.
Product
Mounting
Diagram
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the
numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value
Menu Options
Main Level Programming Levels Description
Starting Address
d___
d001–d512
Selects the starting address
DMX Personality _CH
2CH
Selects DMX personality
5CH
8CH
Auto Program
Brightness and Strobe
Speed
C000 C000-C255 FS-0-FS-9
Sets auto program brightness and
strobe speed
Automatic Mode
AUTO
Sets auto program
Sound-Active Mode
and Sensitivity
SU- SU-0-SU-8 S-00-S-99
Sets sound active mode and
sensitivity
Slave Mode
SLAV
Sets Slave mode
Temperature
tENP
Temperature display
Inverse Display diS
diS
Change the LCD display text position
rdiS
Factory Reset
LoAd
Loads factory default settings
DMX Linking
The MegaStrobe™ FX12 can work with a DMX controller when linked by
DMX serial connections.
Instructions for connecting and configuring this
product for DMX operation are in the User Manual.
If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
Starting
Address
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 505.
Master/Slave
Connection
The MegaStrobe™ FX12 uses the DMX data connec
tion for its
Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
Bracket Adjustment Knob
Mounting Bracket