Filter
Top Products
EN MegaStrobe™ FX12 QRG
3
What Is
Included
· MegaStrobe™ FX12
· Power Cord
· Warranty Card
· Quick Reference Guide
To Begin
Unpack your MegaStrobe™ FX12
and make sure you have received all
parts in good condition. If the box or contents appear damaged, notify the
carrier immediately, not CHAUVET®.
Product
Description
The MegaStrobe™ FX12 is a high-powered LED strobe light.
Lightweight, robust housing permits easy transport and advanced software
controls dimming, strobe rate, chases,
and operating modes without a
controller.
Product Overview
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 26 MegaStrobe™ FX12 products at 120 VAC and 48
units at 230 VAC.
Fuse
Replacement
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the exact
same type and rating.
4. Re-insert the fuse holder and reconnect power.
Back Panel View
DMX Out
DMX In
Power In
LED Display
Fuse Holder
Microphone
Power Out