Filter
Top Products
Page 8 of 17 LED Followspot 75ST User Manual (Rev. 04)
Mounting
Before mounting this product, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Orientation
The LED Followspot 75ST may be mounted in any position; however, make sure
adequate ventilation is provided around the product.
Rigging
Before deciding on a location for this product, always make sure that it will be easy
to access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support
its weight. Please see the Technical Specifications section of this manual for weight
information.
When mounting this product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for
this purpose.
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs using your
bare hands. Using tools could damage the knobs.
Mounting Diagram