Filter
Top Products
Operation
Q-Spot™ 560-LED User Manual Rev. 08 -13-
Stand-alone
Operation
1. Go to MENU > INTRO > RUN.
2. Select a stand-alone operation mode (AUTO 1, AUTO 2, CUSTOM,
SOUND 1, SOUND 2, or TEST).
Of all the stand-alone operation modes indicated above, only “CUSTOM” is editable
(see Edit Custom).
Master/Slave
The Master/Slave mode enables one or more Q-Spot™ 560-LED products (the slaves) to
simultaneously duplicate the output of another Q-Spot™ 560-LED (the master), without a
DMX controller, whether in auto/custom or static modes,.
1. Set the master unit
:
a) Select a stand-alone mode, as indicated above.
2. Set each of the slave units:
a) Go to MENU > INTRO > RUN.
b) Select
SLAVE
.
· Do not connect a DMX controller to the master or slave products.
· The master unit should be the first unit in the DMX daisy chain.
Display Mode
1. Go to MENU > INTRO > DISPLAY.
2. Select a display mode (60 CLOSE or BRIGHT).
· When in the “60 CLOSE” setting, the LCD’s backlight will turn off after 60 s.
· When in the “BRIGHT” setting, the LCD’s backlight will stay on.
Software Version
1. Go to MENU > INTRO > INFO.
2. The display will show Edition.
3. Press
<ENTER>
to see the installed software version.