Operation
Legend™ 412 Series User Manual Rev. 04 -13-
Master/Slave
The Master/Slave mode allows a group of Legend™ 412’s or Legend™ 412 VW’s (the
slave units) to simultaneously duplicate the output of another Legend™ 412 or Legend™
412 VW (the master unit) without a DMX controller.
1. Set each of the slave units:
a. Go to SLNd and press <ENTER>.
b. Select SL 1 (duplicates the master unit exactly) or SL 2 (offsets pan and tilt
settings that creates a different look).
2. Set the master unit:
a. Go to SLNd and press <ENTER>.
b. Select NASt.
c. Go to ShNd and press <ENTER>.
d. Select the desired auto program (Sh 1~4).
Do not connect a Legend™ 412 together with a Legend™ 412 VW in Master/Slave
mode.
The master unit is the one that runs an auto program.
Do not connect a DMX controller to the units configured for Master/Slave
operation.
The master unit should be the first unit in the DMX daisy string.
Color Settings
(Legend™ 412 Only)
The color setting determines how the Legend™ 412 generates the white color based on
various RGB settings.
1. Go to bALA and press <ENTER>.
2. Select red, Gree, or bLue.
3. Select the desired color value (125~255).
4. Repeat for the other colors.
Blackout Mode
This setting determines whether the Legend™ 412 or the Legend™ 412 VW starts playing
an auto program when powered up or remains static in the “Home” position.
1. Go to bLnd and press <ENTER>.
2. Select YeS or no.
Display Mode
This setting determines whether the control panel display stays on indefinitely or turns off
after 2 minutes of inactivity.
1. Go to Led and press <ENTER>.
2. Select YeS or no.
Pan Invert
This setting allows the user to invert the direction of the pan control.
1. Go to PAn and press <ENTER>.
2. Select YeS or no.
Tilt Invert
This setting allows the user to invert the direction of the tilt control.
1. Go to tILt and press <ENTER>.
2. Select YeS or no.
Display Invert
This setting allows the user to invert the direction of the control panel display.
1. Go to Led and press <ENTER>.
2. Select on or oFF.