Filter
Top Products
Operation
Legend™ 412 Series User Manual Rev. 04 -11-
4. Operation
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently selected
value in to the current function
<UP>
Navigates upward through the menu list and increases the numeric
value when in a function
<DOWN>
Navigates downward through the menu list and decreases the numeric
value when in a function
Control Options
Legend 412
You can set the Legend™ 412 start address in the 001~512 DMX range. This enables
control of up to 18 units in the 28 channel ADVANCED personality.
Control Options
Legend 412 VW
You can set the Legend™ 412 VW start address in the 001~512 DMX range. This enables
control of up to 25 units in the 20 channel ADVANCED personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map has a Menu Level
and a variable number of programming levels for each option.
To go to an option in the Menu Level, press <MENU> repeatedly until the option shows
on the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will see
the selected value.
To exit to the previous menu level, press <MENU>.
DMX Personality
This setting allows you to choose a particular DMX personality.
1. Go to Chnd and press <ENTER>.
2. Select the desired personality based on the product.
Legend™ 412:
Select 12Ch (Basic) or 28Ch (Advanced)
Legend™ 412 VW:
Select 10Ch (Basic) or 20Ch (Advanced)
See the DMX Values section for the highest starting address you can select fo r
each personality.
Make sure that the s tarting addresses on the various products do not overlap
due to the new personality setting. See the DMX Values section.