Filter
Top Products
Page 10 of 17 4BAR™ Flex User Manual (Rev. 3)
4. OPERATION
Control Panel
Operation
To access the control panel functions, use the four buttons located underneath the
display. See the Product Overview to see the button locations on the control panel.
Button
Function
<MENU>
Press to find an operation mode or to back out of the current menu
option
<UP> Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Menu Map
Mode Programming Steps Description
DMX Mode
512
d 1-512
Sets DMX starting address
Sound Active
Mode
SND S 1-S100 Sets Sound Active mode and sensitivity
Automatic
Mode
AUTO S 1-S100 Sets Auto Program and speed
Configuration
(DMX)
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
DMX
Personalities
and
Starting
Address
The 4BAR™ Flex has a single 15-channel personality.
The 4BAR™ Flex uses up to 15 DMX channels in its
highest DMX mode, which defines
the highest configurable address to 498.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product’s channels.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To choose your starting address:
1. Press <MENU> repeatedly until 512 shows on the display.
2. Press <ENTER>
3. Use <UP> or <DOWN> to select the starting address.
1. Press <ENTER>.