Filter
Top Products
The CR-150 HD • 7
ASSEMBLING ASSEMBLING
ASSEMBLING ASSEMBLING
ASSEMBLING
YY
YY
Y
OUR OUR
OUR OUR
OUR
C R - 1 5 0 H DC R - 1 5 0 H D
C R - 1 5 0 H DC R - 1 5 0 H D
C R - 1 5 0 H D
AT POLARIS CAT POLARIS C
AT POLARIS CAT POLARIS C
AT POLARIS C
The CR-150 HD (#21017) refracting telescope is offered on a German equatorial
mount. The CR-150 HD is shipped in two boxes. The first box includes the
optical tube and all of the standard accessories, which include:
• 20mm Plossl Ocular 1-1/4"
• Star Diagonal 1-1/4"
• 2x Barlow Lens 1-1/4", with built-in Camera Adapter
• 9x50mm Finder and Bracket
• Lens Cap with 112mm aperture stop
The second box contains the tripod, equatorial mount and the hardware
needed to set it up. Included are the:
• CG-5 German Equatorial Mount
• Counterweight Bar
• Two 5.1Kg (11 lb.) Counterweights
• Declination (DEC) Slow Motion Knob
• Right Ascension (R.A.) Slow Motion Knob
• Adjustable Aluminium Tripod
• Accessory Tray
When setting up the telescope, find a large, clear area where the parts can be laid out
without fear of losing them. Start with the tripod and mount. Remove the contents of
the box and place them neatly on your work surface. Leave the optical tube in its box
until you are ready to attach it to the mount. Once your CR-150 HD has been
unpacked and assembled, you will not need the shipping boxes for everyday
storage and transportation. However, you should save them in case you decide to
ship your telescope via a common carrier.
Unpacking YourUnpacking Your
Unpacking YourUnpacking Your
Unpacking Your
CR-150 HDCR-150 HD
CR-150 HDCR-150 HD
CR-150 HD